Shure SM86 Cardioid Condenser Vocal Mic

Studio-quality sound in a rugged stage mic.

Features

• Condenser capsule provides studio-quality sound
• Rugged design handles the abuses of touring
• Tailored frequency response for clear reproduction of vocals
• Cardioid polar pattern minimizes unwanted background noise
• Works excellently with both stage monitors and in-ear personal monitors
• Built-in 3-point shockmount minimizes handling noise
• 2-stage filter reduces wind and breath pop noise

SM86 Cardioid Condenser Vocal Mic Specifications:

• Transducer type: Condenser (electret bias)
• Frequency response: 50 to 18,000Hz
• Polar Pattern: Cardioid
• Output Impedance: 150Î at 1kHz (Recommended minimum load impedance: 600Î)
• Sensitivity (at 1,000Hz): Open Circuit Voltage: -50dBV/Pa (3.15 mV) (1 Pa = 94dB SPL)
• Output Clipping Level: 1000Î Load at 1,000Hz: +3dBV (1.41 V)
• Maximum SPL (at 1,000Hz): 1000Î load (1% THD): 147dB
• Self-Noise: 23dB typical, A-weighted
• Dynamic Range (1000Î): 124dB (maximum SPL to A-weighted noise level
• Signal-to-Noise Ratio: 71dB at 94dB SPL (IEC 651)*
• *S/N ratio is difference between 94dB SPL and equivalent SPL of self-noise A-weighted
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
• Power (Phantom Supply Requirement): 11 to 52 VDC, positive at both pins 2 and 3
• Current Drain: 5.2 mA
• Connector: Three-pin (XLR) professional audio
• Dimensions (H x W): 183mm x 49mm, 7.2" x 1.92"
• Net Weight: 278g (9.8oz.)
• Environmental Conditions;Operating: -18 to 60 C (0 to 135 F) (relative humidity >90%), Storage: -29 to 74 C (-20 to 165 F) (relative humidity >80%)

See our Warranty Information here