JBL JRX212M 12-inch Two-Way Passive Loudspeaker System With 1,000W Peak Power Handling

Full-range monitor for stage situations.

Features

• JBL 12" low-frequency driver with a 2.5" diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice-coil gap than round wire designs, for greater efficiency and power handling
• JBL 2414H-C 1" polymer diaphragm compression driver improves high frequency performance as well as system reliability
• The advanced network topology crossover design shapes frequency response and delivers "coherent summation" in the crossover region
• High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating
• Progressive Transition high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response
• The rugged, acoustically superior enclosure is constructed from .75" MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance
• SonicGuard protects the high frequency driver from excess power without interrupting the performance
• Non-resonant, all-steel handles are used
• Attractive 18-gauge hexagon perforated, steel grille protects components from damage
• Dual-angle pole-mount socket allows the speaker to tilt 10for more uniform audience coverage

Order now and make your stage sound as good as the front of house.

JRX212M 12" Two-Way Passive Loudspeaker System With 1,000W Peak Power Handling Specifications:

• Power Rating: 250W/1,000W
• Frequency Range (-10dB): 60Hz–16kHz
• Frequency Response (±3dB): 70Hz–12kHz
• Sensitivity (@1m): 99 dB SPL (1W/1m)
• Nominal Impedance: 8 ohms
• Recommended Amplifier Power: 250W to 500W into 8 ohms
• Maximum SPL: 129dB
• Nominal Dispersion: 90º x 50º
• Crossover Frequency: 1.8kHz
• Dimensions: (HxWxD): 22.5" x 15.5" x 12.5"
• Weight: 43 lb.
• High Frequency Driver: JBL 2414H-C 25 mm (1") polymer diaphragm compression driver mounted on Progressive Transition Waveguide
• Low Frequency Driver: JBL M112-8
• Input Connectors: Neutrik Speakon NL-4 (x1); .25"
• TS phone jack (x1); parallel

See our Warranty Information here