Cloud Cloudlifter CL-2 Phantom powered gain booster for dynamic and ribbon mics
SKU LWM-01654
USD $638.99
Back-Order
Out of stock, available for back-order. Only pay 50% now then you would have the item(s) in your hands within 2-4 weeks!
1
Save this product to your Wish List for later
Cloud Cloudlifter CL-2 Phantom powered gain booster for dynamic and ribbon mics
Product Details
Brand: Cloud
Type: Microphone Preamps
Dual-mono, phantom-powered gain booster for low-output dynamic and ribbon mics.
The CL-2 is a dual mono Cloudlifter (see # H73309). The CL-2 offers two independent channels of up to +25db of ultra-clean gain, for passive microphones, inline using phantom power.
There are certain mics revered for their sound quality. Among them are passive ribbon mics, such as the Royer R121 (#581141 or MXL R40 (#H69305), and low-sensitibity dynamic mics, such as the Shure SM7B (#270247) and the Electro-Voice RE20 (#270009). But if your preamp doesn't have enough gain or the right impedance requirements, these mics won't perform well. So what do you do if you can't afford a high-end preamp with tons of gain? The Cloud Microphones Cloudlifter CL-1 Mic Activator is the solution.
The Cloudlifters address problems due to gain and impedance requirments by giving passive microphone signals a major inline boost, up to +25db of ultra-clean gain, while properly loading the microphones' transformer for transparent operation. The Cloudlifter CL-1 is self contained, driven only by the phantom power from your mixer or preamp. Ideal for dynamics and ribbons alike, the CL-1 turns phantom power into the extra gain required for using passive microphones. The immediate dose of extra gain can make even a budget microphone/preamp combination sound clean and professional. For broadcasting and live sound, the active output signal of the CL-1 can prevent added noise over long cable runs. With endless uses, Cloudlifters are quickly becoming a standard addition to professional, project and home studios.
In use with multi-mic recording:
Top engineers have taken to using stereo ribbon mics, as well as pairs of SM7Bs as drum overheads to create a rich, powerful texture for drums. Another use for dual ribbons is on a guitar cab set up in stereo, fed by a two amp heads or a stereo amp. If you have a 2-channel preamp that doesn't have the gain/impedance requirements you need, a Cloudlifter CL-2 is just the ticket.
Read what the pros are saying about the Cloudlifter:
"It's simply about gain - the Cloudlifter is a clever and useful solution..." - Rob Tavaglione, Pro Audio Review February 2010
"The Cloudlifter is a winner. It solves problems some ribbon-mic owners don't even know they have. It does exactly what it claims to do, and does so well." - Matthew Mcglynn, Recording Hacks February 2010
There are certain mics revered for their sound quality. Among them are passive ribbon mics, such as the Royer R121 (#581141 or MXL R40 (#H69305), and low-sensitibity dynamic mics, such as the Shure SM7B (#270247) and the Electro-Voice RE20 (#270009). But if your preamp doesn't have enough gain or the right impedance requirements, these mics won't perform well. So what do you do if you can't afford a high-end preamp with tons of gain? The Cloud Microphones Cloudlifter CL-1 Mic Activator is the solution.
The Cloudlifters address problems due to gain and impedance requirments by giving passive microphone signals a major inline boost, up to +25db of ultra-clean gain, while properly loading the microphones' transformer for transparent operation. The Cloudlifter CL-1 is self contained, driven only by the phantom power from your mixer or preamp. Ideal for dynamics and ribbons alike, the CL-1 turns phantom power into the extra gain required for using passive microphones. The immediate dose of extra gain can make even a budget microphone/preamp combination sound clean and professional. For broadcasting and live sound, the active output signal of the CL-1 can prevent added noise over long cable runs. With endless uses, Cloudlifters are quickly becoming a standard addition to professional, project and home studios.
In use with multi-mic recording:
Top engineers have taken to using stereo ribbon mics, as well as pairs of SM7Bs as drum overheads to create a rich, powerful texture for drums. Another use for dual ribbons is on a guitar cab set up in stereo, fed by a two amp heads or a stereo amp. If you have a 2-channel preamp that doesn't have the gain/impedance requirements you need, a Cloudlifter CL-2 is just the ticket.
Read what the pros are saying about the Cloudlifter:
"It's simply about gain - the Cloudlifter is a clever and useful solution..." - Rob Tavaglione, Pro Audio Review February 2010
"The Cloudlifter is a winner. It solves problems some ribbon-mic owners don't even know they have. It does exactly what it claims to do, and does so well." - Matthew Mcglynn, Recording Hacks February 2010
Features
- Gives passive microphones up to +25dB of ultra clean gain; no need to reinvest in an expensive, high-gain premap
- Dual-mono operation for multi-mic or stereo applications
- Self-contained, driven only by the phantom power from your mixer or preamp
- Active output signal prevents added noise over long cable runs
Get the performance you expect from your passive mics without having to reinvest in high-gain, low-noise preamps. Order a Cloudlifter CL-2 today!
You May Also Like
Sold out
![LW Essentials® Basic Single Replacement Strings LW Essentials® Basic Single Replacement Strings](https://d2j6dbq0eux0bg.cloudfront.net/images/89613446/4704889535.jpg)
LW Essentials® Basic Single Replacement Strings
LW Essentials® Basic Single Replacement Strings
was USD $2.99
Save 17%
USD $2.49
On Sale
![Fender 60XL Phosphor Bronze Acoustic Strings - Extra Light Fender 60XL Phosphor Bronze Acoustic Strings - Extra Light](https://d2j6dbq0eux0bg.cloudfront.net/images/89613446/4704442389.jpg)
Fender 60XL Phosphor Bronze Acoustic Strings - Extra Light
Fender 60XL Phosphor Bronze Acoustic Strings - Extra Light
was USD $19.99
Save 40%
USD $11.99
Display prices in:USD